Tigercat LH822D levelling Harvester equipped with Logmax 7000XT harvesting head, set up for softwood.

Yellow excavator with black arm and glass-enclosed cabin, labeled 'Tigercat', parked outdoors near a white building with a blue sky and trees in the background.
View of the interior of a construction vehicle, showing a control joystick, a seat, and various control switches. The vehicle is on a dirt surface outside.
Display screen showing vehicle or machinery diagnostics such as temperatures, battery voltage, engine hours, and RPM, with icons indicating system statuses and settings.
Photo of the inside of a construction vehicle cabin, featuring a seat labeled 'TigerCat', control joysticks on either side of the seat, and a large window showing a blue sky.
Construction site with a Tigercat excavator and a red tractor with a front loader attachment.
Close-up of electrical wiring and circuit board mounted on a yellow panel in an industrial setting.
Inside the cab of a construction vehicle showing the seat, control levers, foot pedals, and a dirty rubber floor mat.
Interior of construction equipment, showing joystick controls, seat, and control panel with buttons and switches.
Close-up of a mechanical equipment with a large yellow corrugated hose attached, situated outdoors on dirt and grass, with trees in the background.
Label showing the model, serial number, and certification information for a Turbo ER Boom System, mounted on a yellow boom. The background has a gray perforated surface, and part of a red fire extinguisher is visible at the bottom right.

$376,500.00 +gst (ex Machine location)

SN: 82283449

Stock #: EE008.

YOM: 2019

Machine hours: 10,589 at inspection.

Details:

Tigercat LH822D levelling harvester, equipped with Logmax 7000XT harvesting head.

ROP/FOPS/OPS certified Cab.

New main pump fitted approx. 2500hrs ago. New attachment pump fitted approx. 1000hrs ago

New track slides fitted - original undercarriage.

1 x new final drive replaced under warranty. Tigercat FPT6.7 Tier II engine,

UHF fitted , all factory Product support bulletins up to date.

Logmax 7000XT set up for softwood

Head has been re-bushed with new pins, cylinders have been resealed, new upper knife arm fitted, new indexator IR10 rotator fitted.

Machine serviced every 250hrs, machine presents in good clean condition & is ready to go straight to work.

Inspections welcome.

Location: NSW

Enquire
Close-up of a red and gray construction machine with a yellow and black flexible protective hose, on uneven ground with dirt and grass, and a blue excavator bucket visible in the background.
A large excavator with a mechanical attachment in a rural outdoor setting with dirt and trees in the background.
Interior view of a construction vehicle dashboard with a joystick control, ignition key, emergency stop button, and safety warning labels. The operator's seat and foot pedals are partially visible.
Green John Deere heavy-duty forestry or logging machine with large tires and a hydraulic arm, positioned on grassy terrain with trees and hills in the background.
A green John Deere 648L bulldozer sitting on grassy terrain with muddy large tracks, under a cloudy sky. Soil and grass are visible around and beneath the machine.

John Deere 648L skidder

A large green tractor with massive tires and a mounted yellow attachment on muddy grassy terrain under a cloudy sky.
Interior of a John Deere tractor cab with a black seat, control levers, and a large window showing an outdoor grassy field.
A black and white label on a green surface indicates the equipment is a John Deere grapple skidder 648L made in the USA by Deere & Company in Moline, Illinois.
John Deere 648L front loader parked on grassy land with trees in the background.
The interior of a green John Deere tractor cab showing two control joysticks, a digital display screen, a seat, and surrounding controls.
Green John Deere tractor on grassy field with trees in the background.
Digital display screen of a piece of machinery showing temperature gauges, a fuel gauge, and other operational indicators, with six buttons above.

$252,000.00. + gst (ex machine location )

SN: 1DW648LXAGC676069

Stock # EE006

YOM: 2016

Machine hours: 7070hrs at inspection

Details:

John Deere 648L skidder, 30.5 tyres & rims, transmission rebuilt approx. 1000hrs ago

Fitted with UHF radio, winch Fitted with cable, joystick steering with rotating seat

1 x spare tyre & rim

7000hr service just completed.

Note: band tracks are not included in sale.

Machine is still working so hours will increase daily.

Inspections welcome

Location: NSW

Enquire
A green John Deere tractor with large muddy tires parked on grassy terrain with trees in the background.

Madill 2250C series II tracked harvester equipped with Logmax 10000XT harvesting head.

A small orange excavator with the brand name Madill on the arm is working on a dirt clearing in a forested area. The excavator's bucket attachment is on the ground.
Metal nameplate for Madill, a manufacturer in Sidney, BC, Canada. It details the machine model number 2350C, serial number 2350C0262, with a maximum weight limit of 89,000 pounds, and cabinet model and serial numbers. It also states compliance with various safety standards.
Climbing excavator in a forested area with trees and bushes, muddy tracks, and a white cab labeled 'MADILL' and 'HT2250C'.
A red and white excavator with the name 'MADILL' on the front, working in a forested area.

$376,500.00 + gst (ex machine location)

SN: 2250C262

Stock # EE005

YOM: 2019

Machine hours: 5388hrs at inspection

Details:

Low hour Madill Harvester, equipped with Logmax 10000XT harvesting head. Upgraded engine cooling system fitted by dealer at approx. 1000hrs.

1 x new final drive & motor replaced under warranty, original undercarriage, fitted with 28’’ grouser plates, QSL9 ltr Cummins Tier III engine.

Logmax head fitted with hardwood feed rollers & 3/4’’ main saw.

Machine is still working, so machine hours will increase daily.

Inspections welcome

Location: NSW

Enquire
A red tracked forestry machine with labeled model HT2250C and STAY 300, working in a forested area with a yellow excavator in the background, surrounded by trees and vegetation.
Metal nameplate on an orange machine showing model number 2250C and serial number 2250C262, manufactured in Sidney, British Columbia, Canada.
A white Mack truck with red accents and decorative designs on the side, equipped with a large crane or loader, parked outdoors on a dirt surface with trees and a partly cloudy sky in the background.
Dashboard of a truck showing various gauges and warning lights, including a parking brake alert, ABS warning light, fuel gauge, temperature gauge, battery voltage, RPM, speedometer, and a central digital display with the time, odometer, temperature, and battery voltage.
Vehicle identification and compliance plate for a Mack truck in Australia, showing model, GVM, seat capacity, VIN, and manufacturing compliance info.

Mack Trident Prime Mover with Kennedy folding skel, set up as stag/pup trailer combination.

A white Mack truck with a large front guard, parked on muddy ground with puddles, under a partly cloudy sky, with a stack of tires to the side and trees in the background.
Inside the cab of a Mack truck, showing the steering wheel with a Mack logo at the center, and various gauges and digital display on the dashboard.
A large white and red logging truck with a red trailer carrying several large black tires, parked on a dirt road with a grassy field and mountains in the background.
Dashboard of a truck cab with various controls, gauges, and a digital display, featuring a large screen, buttons, and knobs.
A metal manufacturer plate attached to a red trailer with some rust and wear. It contains technical and regulatory information about the trailer, including model, manufacture date, and approval details.
Blue modification plate on a vehicle showing registration details, made in Queensland, Australia, with date 23/1/2019, modified by Volvo Commercial Vehicles, and vehicle identification information.

$262,500.00 + gst (ex location)

VIN: 6FMM12G69JD809909

Stock # EE004

YOM: 2018

KLMS: 547577 kms at inspection

Details: Mack Trident 535HP, 18 speed road ranger gear box, Kennedy folding skel, set up for stag/pup trailer combination.

Exte load binders with chains, Elphinstone scales, sleeper cab with by cool cooler. Alloy head board & bull bar.

Truck & folding skel, rego till mid July 2025,

Truck is still working so kms will increase daily.

Truck is in good condition. Inspections welcome

Location : NSW

 

Enquire
Interior of a commercial truck cab showing part of the dashboard, passenger seat, and some equipment, with the steering wheel and side window visible.
Close-up of a firefighter ladder attached to a fire truck, with a black cleaning brush resting on the ladder's rungs.
Inside the cab of a vehicle, showing a yellow digital weighing scale labeled 'EASYWEIGH' attached to a chain, a broom, a red tool, and a white hard hat on the dashboard. Other vehicles are visible outside through the window.

Hyundai R290LC-9HW forestry excavator, equipped with Satco 640FH felling head.

A yellow Hyundai excavator with black tracks, parked on muddy ground with several vehicles in the background and a blue sky.
A large yellow Hyundai excavator with muddy tracks is parked on a dirt surface with puddles, surrounded by trees with green and yellow leaves, under a partly cloudy blue sky.
Identification plate from a protective structure, listing specifications, manufacturer, and safety requirements, with a red warning label at the top.
A large Hyundai excavator with a yellow arm and black tracks, parked outdoors on a gravel surface, silhouetted against the sunlight with trees and a blue sky in the background.
Digital dashboard display of heavy machinery showing the time as 9:08 AM, a fuel gauge indicating full, a temperature gauge indicating cold, a barometer for engine RPM at 1580, with warning icons for fuel, engine, and seat warmer. The dashboard has buttons labeled Power, Work, User, Travel, Auto Idle, and ESC. The background shows part of the machinery with yellow and black parts.
A metal identification plate attached to a red, dirty surface with screws, displaying serial numbers and manufacturing information.
A yellow Hyundai excavator with a black and white logo on the side, sitting on a muddy patch of ground with trees in the background.
A large red and yellow industrial machine, likely a hydraulic scrap metal shear or cutter, situated outdoors on a gravel surface with green trees in the background.
Metal identification plate on a piece of equipment, showing details for a Hyundai excavator with serial number H0002467, model R290-9 H/C, manufactured by ROPSWEST, with other certification and inspection information.

$210,000.00 + gst (ex machine location)

Details:

SN: HHKHZ801JH0002467

Stock # EE003

YOM: 2018

Machine hours: 6910hrs at inspection

Details: Hyundai R290LC-9HW forestry excavator, fitted with PFS forestry cab/guarding ROPS/FOPS/OPS.

New undercarriage fitted approx. 1000hrs ago, including final drives & motors.

New alternator, upgraded A/C system, fitted with fogmaker.

Fire suppression to be serviced prior to sale.

Machine is still working so machine hours will increase daily.

This machine is in good condition & inspection would not disappoint.

Location: NSW

Enquire
Close-up of a large yellow excavator with a tracked base, parked on green grass with trees in the background and the sun shining in the sky.
Close-up of a large, worn hydraulic excavator or construction machine component with visible rust, dirt, and chipped paint, outdoors on a dirt surface with trees and blue sky in the background.
Metal identification plate on a Hyundai excavator machine. The plate contains details such as machine type/excavator model ROBEX29LC-9, product identification number SHHKHZ801JH0002467Z, engine power 147 KW, and operating mass 32540 KG.

Hultdins Supergrip 360S grapple, equipped with Hultdins Super Saw 550S.

A close-up view of a hydraulic excavator attachment with the label 'Super chip,' showing its hydraulic hoses and metal components, set outdoors on a construction site with other machinery and a building in the background.
Heavy industrial machine attachment with hydraulic hoses, warning labels, and a PSAH logo, mounted on a rust-colored support structure, with shipping containers in the background.
Close-up of a construction machinery attachment labeled 'SuperClamps,' with hydraulic hoses and metal arms, against a background of blue sky and industrial buildings.
Close-up view of a heavy-duty hydraulic attachment, labeled 'Super Grip,' mounted on construction equipment, with other machinery and storage containers visible in the background.

$25,000.00 +gst ex location

Details:

SN: 027-19012

Stock # EE007

YOM: 2019 (purchased July 2020)

Machine Hours: approx. 2-6hrs

Hultdins supergrip 360S grapple equipped with Baltrotors GR16SX rotator,

Batlrotors BR3/45 link, 100mm x100mm 45mm pin.

Hultdins supersaw 550S easy connect 10, with 90cm bar & .404 chain.

HD saw mounting bracket on 6 x M16 bolt pattern, 173PCD & hose set.

This machine is in great condition & inspection would not disappoint.

Location: Brisbane QLD

 

Close-up view of a hydraulic excavator attachment, specifically a grapple, with black hoses and metal components, mounted on a rusty metal frame outdoors.
Metal identification plate on a piece of equipment, with information about the manufacturer, model, serial number, maximum load, pressure, weight, and year of construction.
Close-up of a heavy-duty mechanical component with rollers and a central cylindrical hub, possibly part of industrial equipment or machinery.
Enquire

12/04 Gough Engineering Log Forks

Yellow industrial machinery part on grass
Large yellow industrial claw attachment on the ground near a warehouse.
Metal plate on machinery showing details of Fieldchief, model number 201048, serial number 96LF02, with manufacturing date 12/04 by Gough Engineering, New Zealand.
Large yellow industrial equipment part on a construction site

$15,750.00+gst

Stock # EE001

Details:

Removed from CAT966 wheel loader

Serial # 201048

Location: Riverina region NSW

Enquire